Disgraf Home About Disgraf Contact Us Employment Opportunities
New Equipment Used Equipment New & Used Parts Moving & Installation On-Site Service Machining & Repair

New Equipment



Wohlenberg High-Speed Guillotine
cut-tec 76, 92


The Wohlenberg standard: Series equipment PC-technology

100% CIP3-compatible. Already installed PC. Safe for the future. New software-updates always keep the guillotine on the latest standard. Up to 1,500 programs storage capacity. The format database to be individually enhanced. Each machine provides four language packages, according your choice.


Automatic cutting program generation after input of paper size, trim, number of cut sizes from one sheet and trimouts. The cutting program is graphically displayed on the monitor.

Alpha-numeric keyboard

Exactly the same as that on your office PC.

Disk drive

A good value- and everywhere available means for storing data in order to exchange cutting programs. For backup of your stored programs and loading of CIP3 files.

Large color LCD-display

(211 x 158 mm). Radiation-free, high resolution.

Stainless-steel plated machine table

(2mm). Absolutely rustfree. High sliding capacity. Lasts forever.

Fully automatic operation as standard

Individual cut, programmed cut, cut repetition. Clamp only (without cut). Actual value transfer. Hints for paper turning. Automatic paper ejection. Feed correction. Correction of cut sizes from one sheet. Password protection for cutting programs. Pocket calculator functions. Sorting programs in numerical or alphabetical order. Cut counter. Log book function. Modern machine auto-diagnosis. Text information for operator’s guidance.

Electro-magnetic clutch

Requiring little maintenance. Oil leakage as with hydraulic clutches cannot occur.

New safety light barrier

More than 45 infrared channels are permanently monitoring the guillotine front table.

Positioning system

Encoder. Frequency controlled drive motor. Precision-ball screw. Linear guide.

Machine frame cast in one piece

The torsion-proof cutting unit is ideally suited for high load and a guarantee for utmost cutting accuracy for decades.

Basic equipment

  • Color display, passive
  • Alpha-numeric keyboard
  • Disk drive
  • Safety light barrier
  • Stand-by function
  • Electronic log book
  • Autoprogrammer
  • Perspex rear table cover
  • Stainless steel side table, right hand
  • Stainless steel side table, left hand
  • Slot closing device
  • Clamp plate (50 mm)
  • 2 knives
  • Operating tools
  • Hydraulic oil
  • Operating instructions
  • CE-certificate and certificate of conformity
  • according CE-regulations
  • Electrical equipment for A.C. 400V,
  • 50 cycles, 3-phases


Cut release by a two-hand safety engagement. The downward movement of the knife is immediately stopped when one of the buttons is released. The new self-control safety light barrier operates fullyelectronically and is maintenance free.

It is constantly active and subject to a check before each cut. The mechanical safety catch is an additional feature against the doublecycling of the knife. All machine functions are permanently monitored. Malfunctions are described on the display. Unacceptable deviations are detected by encoder and limit switches. The machine will be disconnected immediately.

  • New electronic safety light barrier
  • Two-hand safety engagement
  • Mechanical safety catch
  • Safety pressure for cut line indicator
  • Mechanical overload device
  • Rear table slot closing device


>> Review Technical Data

>> Download the Brochure (pdf)

>> Request more information



Disgraf Services, Inc.  |  720 N. Agnes  |  Kansas City, Missouri 64120
Phone 816.474.3884  |  Toll free 800.279.3884  |   Fax 816.474.7278  |  E-mail sales@disgrafservices.com

Disgraf Home  |  About Disgraf  |  Contact Us  |  Employment Opportunities

New Equipment  |  Used Equipment  |  New & Used Parts  |  Moving & Installation  |  On-Site Service  |  Machining & Repair

© Disgraf Services, Inc. All rights reserved.