| Cutting table width mm/inches |
760/30" |
920/36" |
| Depth of rear table mm/inches |
760/30" |
920/36" |
| Clamp opening without clamp plate mm/inches |
110/4.3" |
120/4.7" |
| Knife movement time cycles/min. |
50 |
50 |
| Clamp pressure, steplessly adjustable .lbs |
440-5500 |
440-6610 |
| Smallest cut with clamp plate mm/inches |
42/1.6" |
57/2.2" |
| Smallest cut without clamp plate, mm/inches |
15/0.6" |
18/0.7" |
| Fuse for mains supply, VAC/A |
3 x 10 |
3 x 20 |
| Strain on floor incl. 30% for shock load kN/m2 |
7,2 |
9,2 |
